The bathroom is a very important part of your home as it is with the other areas. Here, you get to have warm baths and doing some vanity for yourself. In the bathroom, you will find different bathroom fixtures such as tub and shower faucets. Over time, you might experience damages in your bathroom fixtures and the first thing you can do is to fix such fixtures.

4) You will need to have on hand loud toilet tape, small gas torch, solder, flux, plumbing sandpaper, pipe cutter, gas tape (to seal gas line) and maybe some pipe glue. Ask the sales person at the hardware store for a more defined list.

When you get to the house stand if front of the toilet and locate the water shut off valve. Should be down below the toilet on the wall. Just turn it off (righty-tighty) completely and flush the toilet. All the water should have left the tank, well at least most of it. If there is remaining water line repair get it out with paper towels or a rag. The important thing is that no more water came in. If it did then your valve is not shut all the way or not working and you need additional help.



After you have the stems out you should be able to find the washer on the "inside" end. If it is nicked, torn or brittle it is likely the cause of your drip. Even if it looks brand new, go ahead and replace it. You've already come this far. You can get replacement washers at almost any hardware store. Sometimes you may want to replace the whole stem, especially if the handle end is stripped out. It's best to just take the stem with you to the store and see if you can match it up. Most Do It Yourself stores have replacement stems for many popular brands. If your valve has a center diverter valve to switch the waterfrom the tub spout to the shower head the same process applies. Many times it is easier to replace the diverter stem than to repair it. This really depends on the design of the stem.

The location of a plumbing contractor is a key factor. This is because he or she will not only charge you an hourly rate, but travel costs will also be charged. This can add a significant amount to the final bill if the contractor has to travel from the other side of town.

If you do not have hot water in your home, it may be a bit tricky for you to attempt to find out what the cause is yourself. If you have a tank that is leaking, this may be the reason why you do not have any hot water. If you have an electrical unit, the causes may be things such as a bad heating element, fuses that are blown, an overload switch which is bad, circuit breakers not working properly or faulty thermostats. If you have a gas tank, the problems causing you to not have hot water line repair may include a problem with the thermocouple burners. In situations like these, it is imperative that you contact a reputable plumbing company to get everything squared away.

From your own point of view, it is important that the plumber be trustworthy and credible. Ensure the plumber comes with at least two strong references which you can verify. This will help you be more secure and suffer less anxiety.

Find out if the plumber works on a 24 hour basis and, if so, what are the extra charges involved. More important than the costs however are the person's trustworthiness and reputation. After all, he or she will be in your home and around your possessions. You should feel comfortable with their presence and confident that they are honest.